You can build your own kitchen table but in order to get the finest result, you need to know how to build a kitchen table properly. By following correct instructions will be very helpful in building kitchen table. Kitchen table is considered as a must have kitchen furniture which plays role as eating place, kitchen storage or also can be used just as a place to spend time in the kitchen.
Kitchen tables are must have kitchen furniture which not only used for spending meal time but play significant role in kitchen beauty and value at the same time. Well, kitchen tables are widely available in the market in many options of style, design, color, shape, size, material and price which can be purchased according to your sense of style, need and purchasing power. You can build your own kitchen table and you will need some power tools such as toy saws, screw drivers or putty knife and small wood wedge in order to get the project done properly.
2 Picture Gallery: How to Build a Kitchen Table
Instructions in How to Build a Kitchen Table
First of all, you have cut four legs approximately 35 inches long out of 2×2 wood and then get a piece of wood measuring approximately 2 feet x 2 feet x 2/4 inches of thickness to be used as tabletop. Use light paper to sand the wood to make all sharp edges and flat surfaces become smooth. You should use 8 metal brackets which have L shape with 2 inches long on each L branch. You should also get a package of 1 inch long, size 8 wood screws. Well, you can purchase them at home improvement store since they are widely available. The brackets have to be screwed onto each leg, but you have to make sure that they are positioned at the leg’s end so the end of wood piece will flush the bracket bend. Rotate the leg with 90 degrees so you can screw in the second bracket, and you can repeat it again and again until all of brackets are well screwed in. Get some screws ¼ to ½ inch shorter than the tabletop thickness. Put the tabletop on floor with the top facing down and then place a table leg, bracket end down on the corner of tabletop. The leg edge has to be lined up with the tabletop edge and hold down the bracket on the tabletop, then one of the screws has to be screwed through the bracket hole. This step has to be done until all of brackets are well screwed in with all of four legs. You can turn over the table and shake it for motion check. If there is a motion, you can sink two long screws through the tabletop into the each leg top or you can also simply replace the brackets with the thicker and longer ones. As finishing touch, you ca paint or stain the table with your desired color and let it dry overnight to make it ready to be used.
Well, you have been described about how to build a kitchen table which you can use as references in building your own kitchen table. Hopefully you will find it useful in your kitchen table building project.
This post topic: Kitchen Furniture